All Flow machines can be accessed from the internet on any browser capable device.
The Flow admin is responsive program so any common screen size can be used.
To register and setup your printer for remote access please first, connect you printer to the internet.
It can be done by WiFi or LAN cable connection. For flowless connection speed we recommend LAN cable connection if avaliable.
Please access the FlowAdmin IOT page from your computer attached to the same network with the printer.
If you did not used the FlowAdmin before please follow this article to log in and setup credentials:
https://support.craftbot.com/hc/en-us/articles/360006958477-Accessing-the-FLOW-Generation-IOT-Page
After you successfully logged in to the FlowAdmin web admisitration page, please go to the 
menu andnavigate to 
network menu.
In the connection testing all the lines must be green:
Next step is to register on Craftbot.com if you have not done it yet.
https://support.craftbot.com/hc/en-us/articles/5078006437789
Log in to you account an than navigate to 
menu.
Add your FLOW printer 
.
Th printer friendly name must be unique.
If you added you printer go to 
and copy the token to the clipboard with the button
Switch back to the printer FlowAdmin page and insert the token in the web access key text box (CTRL+V)
Now you printer successfully registered in the IOT and can be reached with it's freindly name.
Comments
0 comments
Article is closed for comments.